history Updated on 28.10.2026 timer 8 min read CE marking confirms that a manufacturer has checked their product against all relevant EU directives and regulations before placing it on the market. For companies in industry, mechanical engineering and electrical engineering, this means that it’s not a single product but entire product families, with variants and language versions, that each need their own up-to-date declaration confirming this compliance. The CE mark itself is only the final, visible step. The actual work lies in the conformity assessment procedure and in the technical documentation. This article explains what CE marking involves and how companies can keep track as the number of variants grows. What Does CE Marking Mean for Manufacturers? The letters CE stand for Conformité Européenne, French for European conformity. With the CE mark, the manufacturer declares on their own responsibility that their product meets the essential requirements and safety requirements of the relevant European directives. As a rule, no authority checks this in advance. The conformity assessment is the company’s own responsibility, in certain cases together with a notified body. In practical terms, this means quite a lot for companies: every new product variant, every changed component and every new language version can affect this declaration. Anyone who doesn’t manage product data, technical documentation and approvals centrally quickly loses track of which version belongs to which product status as the number of variants grows. The real significance of CE marking lies in the free movement of goods within the EU: a product bearing the CE mark can generally be sold in any member state without a further national inspection. This makes it a key building block for product safety across the European market. Which Products Are Subject to Mandatory CE Marking? The CE marking requirement applies to a wide range of product groups: machinery, electrical equipment, radio equipment, elevators, pressure equipment, toys, construction products, personal protective equipment and medical devices, to name just the most important ones. A single product can also fall under several directives at once. For each of these product groups, at least one EU directive or regulation applies, and in some cases several at the same time. Not every product needs the marking. Exempt are products for which no harmonized rules exist in the relevant legislation, as well as certain niche and custom solutions. For companies in mechanical engineering and electrical engineering, the practical question is rarely whether a CE marking requirement applies at all, but which EU requirements apply in combination and how this changes with every new product variant. Which CE Directives and EU Regulations Are Relevant? The CE directives that apply to a product depend on the product type, intended use and technical configuration. Among the best known are the Machinery Directive, the Low Voltage Directive, the EMC Directive for electromagnetic compatibility, and the Radio Equipment Directive. In addition, there are product-specific regulations, for example for medical or construction products. A product can easily fall under several directives at the same time. An electrically powered device with a radio module, for example, typically meets both the Low Voltage Directive and the requirements for radio equipment. The applicable requirements from each individual European directive must be verified and documented separately. How Does the Conformity Assessment Procedure Work? The conformity assessment procedure is the path by which a manufacturer demonstrates the product’s conformity with the relevant directives. Depending on the risk class, this ranges from internal production control to assessment by a notified body, for example for certain medical devices or higher-risk pressure equipment. The European Commission publishes guidelines on which procedure applies to which product group. This procedure concludes with the EU declaration of conformity. It summarizes which directives were assessed, which harmonized standards were applied and who is responsible for the product. These standards are considered harmonized once they are listed in the EU Official Journal. Before a product can carry the CE mark, this assessment must be complete, regardless of product size or quantity. What Belongs in the Technical Documentation and the Declaration of Conformity? The technical documentation is the factual basis behind every declaration: Design drawings Risk assessments Test reports Circuit diagrams User manuals Evidence of the standards applied It must be complete enough for a market surveillance authority to be able to verify the product’s conformity at any time, even years after delivery. The declaration itself is part of a product’s accompanying documents. It names the authorized representative, the specific product, the directives and standards fulfilled, and a signed assurance that all requirements are met. For product variants, each version generally needs its own up-to-date declaration, which quickly becomes its own administrative task when the product range is broad. How and Where Is the CE Mark Affixed? Fixed formal rules apply to affixing the CE mark. The CE mark must be affixed to the product visibly, legibly and permanently, where this is technically possible. Where it is not possible, for example on very small components, the packaging and accompanying documents are the permitted alternative location for the CE mark. A minimum height of 5 mm applies to the CE mark, unless another requirement exists for the specific product. The proportions of the letters C and E must not be distorted when scaling the mark up or down; the lettering always keeps a fixed ratio to itself. The exact placement of the CE mark also depends on how many language versions and variants a product has. For companies with many product variants across multiple language versions, this is exactly where errors tend to recur: wrong mark size, outdated print templates, and CE marks simply forgotten on a new packaging variant. What Roles Do the Manufacturer, Importer and Authorized Representative Play? Responsibility lies first with the manufacturer. They carry out the assessment procedure, prepare the technical documentation and sign the declaration. An authorized representative within the EU can take on certain obligations on behalf of a manufacturer based outside the EU, such as keeping the documentation available for authorities. The importer brings products from non-EU countries into the European market. They must check whether the manufacturer has fulfilled their obligations before reselling a product. If this declaration is missing or incomplete, the importer also bears a legal risk. What Happens if CE Marking Is Missing or Incorrect? If the CE mark is missing or incorrectly affixed, the market surveillance authority can: Stop distribution of the product Order recalls Impose fines In the worst case: order a production stop or a recall spanning multiple countries and language versions Ultimately, the obligation to carry CE marking always comes down to protecting consumers as well. The free movement of goods within the EU is also tied to correct marking. A product without valid CE marking loses this advantage, even if it is technically flawless. Compliance with the marking requirement is therefore not a bureaucratic side issue, but a direct prerequisite for market access. How Do Manufacturers Keep Track of CE Documentation Across Many Product Variants? The larger the product range, the harder it becomes to manage declarations of conformity, technical documentation and CE marks manually. In practice, these documents are often scattered across file servers, Excel lists and individual inboxes, with no clear link to the matching product variant or language version. The result: repeated queries to specific people, outdated versions still in circulation, and uncertainty about which version is actually approved. Managing product data, technical documentation and approvals centrally, rather than spread across several systems, reduces exactly these system breaks. Every product variant then stays clearly linked to its currently valid declaration, its technical documentation and its approved marking, across all language versions and sales channels. In concrete terms, this means a new variant is automatically assigned the matching document template, a changed standard triggers a visible approval task, and every language version draws on the same, currently valid status instead of its own copy made at some point in the past. For marketing, product management and quality teams, this removes a recurring coordination effort that would otherwise quickly become a bottleneck as the product range grows. Frequently Asked Questions (FAQ) Is CE Marking a Quality Check Carried Out by an Authority? No. It is a self-declaration by the manufacturer. Only for certain risk classes is a notified body additionally involved. Does Every Product Variant Need to Be Marked Individually? Yes. Every version with differing technical characteristics needs its own up-to-date declaration and a correctly affixed CE mark. How Long Must Technical Documentation Be Retained? Generally for at least ten years after the last product is placed on the market, though this can vary depending on the applicable directive. Does CE Marking Also Apply Outside the EU? No. It governs market access within the EU and the EEA respectively. Other markets have their own marking systems. Conclusion For manufacturers, CE marking is not a one-time step but an ongoing task that starts over again with every new product variant, every amended directive and every new language version. Anyone who doesn’t keep declarations of conformity, technical documentation and the correct affixing of the CE mark centrally under control risks exactly the kind of errors that market surveillance authorities scrutinize most closely. Was this article helpful? Yes No Thank you for your feedback! arrow_back Back to main overview Daniel Wündisch Digital Solution Advisor Every day, I talk to marketing and product teams who know exactly what isn't working, but don't know where to start. Before we discuss software, let's talk about those requirements, because there's no “one-size-fits-all” solution. Let´s connect!
Blog Digital Product Passport Electronics Manufacturers: What to Do Now Digital product passport for electronics manufacturers: Battery passport due February 2027. What data you need and how to…
Blog RoHS & CE: What Documentation Obligations Electronics Manufacturers Need to Know What the RoHS Directive regulates, which limit values apply to lead, cadmium, and other substances, and what documentation…
Blog Digital Product Passport Software: Why the Right Software Is Becoming Critical Digital Product Passport Software is coming: Learn why Digital Product Passport Software will become essential for compliance, transparency,…
Blog 5 Tips for better Customer Experience In this article, you'll learn five practical tips to turn every touchpoint into an unforgettable experience - from…
Blog What is a User Journey? | Definition, Planning & Mapping The user journey helps you to better understand the path your users take. But how exactly do you…
Blog What is Customer Experience (CX)? Customer experience (CX) is the key to enthusiastic customers and sustainable business success. In this article, you will…
Blog Digital Product Passport Electronics Manufacturers: What to Do Now Digital product passport for electronics manufacturers: Battery passport due February 2027. What data you need and how to…
Blog The Complete Guide: DAM for Electronics Manufacturers Digital Asset Management for Electrical Engineering: How DAM centrally manages product media, controls approvals, and reduces system fragmentation.
Blog RoHS & CE: What Documentation Obligations Electronics Manufacturers Need to Know What the RoHS Directive regulates, which limit values apply to lead, cadmium, and other substances, and what documentation…